Now, as an advanced manufacturing technology, laser processing has been widely used in important sectors of the national economy such as automobiles, electronics, electrical appliances, aviation, metallurgy, and machinery manufacturing. to an increasingly important role.
The specific processes include laser marking, laser drilling, laser engraving, laser welding, laser cutting, heat treatment, coating, rapid prototyping, etc. During the production process, a small amount/large amount of smoke and dust will be generated. It affects the quality of the processed workpiece and the workshop environment, and will damage the expensive laser head. Therefore, for all the corresponding processes of laser processing, Wuhan Huaxia Starlight has developed a matching smoke and dust purifier, which has a complete set of laser processing smoke and dust purification solutions. plan.
Laser marking metal/non-metal
1. The dust generated by laser marking metal is mainly fine metal dust. This kind of dust is easy to block the filter with the general smoke purifier on the market, and the cost of consumables is high.
2. The dust generated by laser marking non-metal is mainly micro dust and smoke. This kind of smoke mainly has the characteristics of small particle size, stickiness, and peculiar smell. It is necessary to solve the problem of blockage of dust particles and the problem of peculiar smell , The dust in some working conditions is also corrosive.
For these working conditions, Huaxia Xingguang CSDC series smoke purifier with automatic dust removal device can avoid the problem of clogging.
Laser welding processing
The smoke generated by laser welding is mainly high-temperature dust and smoke. This type of smoke mainly has the characteristics of small particle size, viscosity, and high temperature. Because laser welding, especially continuous welding, continues to generate high-temperature gas mixed with sparks, it is easy to Ignite the filter, creating a safety hazard. For this working condition, Huaxia Starlight has developed a high-temperature-resistant, flame-retardant series of physical spark capture channels with a pre-spark arrester to avoid burning out the filter.
Laser cutting and adsorption
When cutting flexible sheets such as FPC, pole pieces, and aluminum foil paper with low-power lasers, it is necessary to first absorb the cutting workpiece on the work surface, and vacuum it while processing. This requires a host to perform two functions. Our machine can The noise is controlled below 85 decibels.
Laser cutting metal/non-metal
1. When laser cutting metal sheet metal, a large amount of dust and smoke will be generated. If it is not handled in time, it will cause environmental pollution and damage to the laser head. Generally, direct suction, blowing suction, and damper type dust extraction are used for different dust extraction Way, Huaxia Starlight corresponds to industrial dust collectors with different powers to solve the problem.
2. When laser cutting leather, acrylic, plastic, PVC and other non-metallic materials, a large amount of dense smoke with peculiar smell will be produced. If it is not treated in time, it will cause pollution to the working environment. For problems such as clogging, unclean odor removal, and high prices, we have special models with super high cost performance.
Laser Welding Workstation
Robot/manipulator welding will produce a large amount of dust and smoke. If it is not handled in time, it will cause environmental pollution and damage to the laser head. Generally, direct suction, blowing suction, and damper are used to extract dust. For different dust extraction methods, our The machine can easily fulfill a variety of needs in one machine.
Post time: 20-03-23